Sark Marine Services
Below you will find a selection of marine services in the area which are recommended by the HarbourGuides.com team.
These are available in Havre Gosselin on the west coast and Greve de la Ville on the east coast and are marked with YELLOW buoys. The moorings are substantial and are checked annually but you use them at your own risk.
They are available for Ł15 per 24 hours or part thereof, payable by card or cash at the Visitor Centre.
At Havre Gosselin there is a small jetty with a ladder for low water access where dinghies can be left. The path to the top of the island begins at this point. At Greve de la Ville dinghies can be left on the steps at the beginning of the path up to the top of the island.
If you choose to anchor in either of these locations please keep well away from the moorings.
There is no charge for anchoring off Sark.
Dixcart Bay: A large flat bay with a stony incline from about half way up. Good holding on sand at the seaward end of the bay. An easy path to the top of the island. A very popular anchorage.
Derrible Bay: A large flat bay with excellent holding on sand. A long path to the top of the island. Care should be taken to leave dinghies near the steps as the top of this bay is cut off from steps near high water. Grande Greve: Good holding sand at the seaward end of the bay. Please note that the path up to the top of the island from this bay is steep, built by volunteers and not maintained by the Island Authorities..
Antifouling, Battery Chargers, Blast Cleaning, Boat Builders & Repairs, Boat Cleaning, Boat Storage, Boatyards, Books & Charts, Chandlery, Deckware, Dry Berthing, Grp Repairs/Maintenance, Insurance Repairs, Liferafts & Lifejackets, Marine Batteries , Marine Blast Cleaning, Marine Clothing, Marine Diesel, Marine Electricians, Marine Electronic Equipment, Marine Electronics, Marine Engineers, Marine Fabrications, Marine Fuel, Marine Gas Specialist, Marine Installations, Marine Joinery, Marine Painting, Marine Plumbing, Marine Refrigeration, Marine Rigging, Marine Safety Equipment, Masts & Rigging, Osmosis Treatments, Outboards, RIB Repairs, Welding
Welcome to Boatworks+ Guernsey in the Channel Islands.
Boatworks + ongoing programme of investment enables us to continually improve our level of service to you our customers and maintain our position as Guernsey's No. 1 marine traders.
In our Clothing Department we have carefully selected ranges of boat wear and leisure wear that we believe to be the best.
Boatworks+ Chandlery Department is laid out in various sections to help you locate the products you are looking for more easily.
Boatworks+ provides year round fuelling services in St. Peter Port harbour Guernsey from its Castle Emplacement site. We also stock a comprehensive range of lubricants, sundries and provisions.
Our purpose built boatyard workshop can accommodate several vessels of up to 50 feet or 50 tonnes.
Our St. Peter Port slipway enables us to haul vessels ashore for short term emergency work and general maintenance.
With the aid of our Knipstra hydraulic boatlifter, we are able to move boats from our slipway into the boatyard, workshop or other locations.
Our fishing tackle department is conveniently situated close to the Castle Cornet breakwater, St. Peter Port, a popular Guernsey angling destination.
Through our rigging division, â€śOffshore Spars and Riggingâ€ť, we are the Channel Islands regional centre for Selden Masts which also incorporates â€śProctor Dinghy and Dayboat Mastsâ€ť.
Our staff are factory trained and certified by Selden to specify and complete spars to a full range of specifications.
We consider safety at sea paramount and have a large dedicated department to offer you the very best choice of safety equipment to aid safety and safe navigation.
View a 360° tour